Ford F-Series

F-250 and F-350 stock boost pressure levels tend to run at about 15-20 PSI. But with a tuned IDI or Power Stroke diesel engine those boost pressure levels typically run from 30-35 PSI, which is why GlowShift’s 35 PSI boost gauge is an ideal fit. The 7.3L IDI & Power Stroke 35 PSI Boost Gauge was made for any 92-97 F-Series running a turbo, giving you the ability to easily monitor your Ford’s boost pressure levels from 0 to 35 PSI through one gauge. A 7.3 Powerstroke boost gauge is a great fit for monitoring boost levels in your 92-97 F-Series when you’re getting more boost out of your stock or upgraded turbo.

GlowShift’s Boost T-Fitting Adapter allows you to avoid drilling and tapping into your intake manifold by cutting the MAP line and inserting the T-fitting in the two cut ends. The two included hose clamps allow you to tighten the two ends of a MAP line to the T-fitting for an airtight seal which results in extremely accurate boost pressure readings. The T-fitting features a 1/8-27 NPT Female thread that can securely hold an electronic boost pressure sensor or compression fittings which run the boost line directly to the back of the gauge.

The 1500° F Pyrometer EGT Gauge is essential for anyone driving a 1992-1997 Ford F-Series F250 and F350 with a 7.3L IDI or 7.3L Powerstroke who is pushing for maximum output of their diesel engine. This 7.3 Powerstroke EGT gauge will help ensure that your exhaust temperature is not running too hot which could result in engine failure. An EGT gauge 7.3 Powerstroke is considered one of the most important diesel gauges for the 92-97 F-Series. Readings up to 1500° work for many diesel F-250s and F-350s, with this gauge typically being enough to cover the range.

A Transmission Temperature Gauge is essential for any 7.3 IDI or 7.3 Power Stroke and goes hand-in-hand with monitoring 92-97 F-Series E4OD and 4R100 transmissions, especially when these diesel trucks are towing heavy loads. This gauge allows you to closely monitor the temperature of your transmission, ensuring that it does not overheat causing significant damage. Once you connect the included electronic sensor with 1/8-27 NPT male threads, this Powerstroke trans temp gauge will deliver accurate readings from 80° to 260° Fahrenheit.

The 100 PSI 7.3 Powerstroke Fuel Pressure Gauge for the 1992-1997 Ford F-Series F250 and F350 displays readings from 0 to 100 PSI, ensuring your fuel pressure is running at optimal levels and is not too low which could result in loss of horsepower or damage to your fuel pump and injectors. For the 92-97 F-Series, an average range of 45 PSI or higher is ideal. Running a lower level of fuel pressure on this truck over an extended period of time could potentially lead to permanent damage. You also want to make sure that you have proper fuel pressure under load and that your fuel system can handle the amount of power your F-Series is producing.