GlowShift’s Elite 10 Color Series Water Temperature Gauge offers some ultra-high performance features, and allows you to closely monitor your engine's coolant temperature ensuring it does not overheat and cause critical engine damage. This water temperature gauge reads from 100° to 280° Fahrenheit with the included electronic temperatures sensor that reads and displays your vehicle’s water temperature with unmatched precision.
This 2 1/16" (52mm) water temperature gauge outperforms the competition with features that include a peak recall function, programmable high and low warning functions, stepper motor technology, 10 color through dial LED lighting, as well as a self-calibration mode at start up, an illuminated red needle, and a low profile magnified tinted lens. The adjustable high and low warning functions will alert you visually or with an optional audible tone, ensuring your vehicle’s water temp is not running too hot, and the peak recall feature gives you an instant assessment of your vehicle. The included stepper motor technology makes all needle movement remarkably smooth and all gauge readings extremely accurate. GlowShift’s 10 color through dial lighting allows you match your factory gauges or add a distinct look to your vehicle's interior, and with the color recall feature you don’t have to worry about resetting the gauge to your preferred color every time you turn your vehicle on. This water temperature gauge will also dim 30% when connected to your factory headlight switch, making it much easier to read while driving at night.
GlowShift’s Elite 10 Color Series Water Temperature Gauge’s sleek 1/8-27 NPT electronic temperature sensor can be installed by replacing your stock sensor or for an easier install you can purchase one of GlowShift’s T-fittings or Water Temperature Sensor Adapters. All of the included sensor and power wires are completely plug and play, and securely snap into the back of the gauge with modular connectors. This water temperature gauge is powered by 12 volts and will let you to power an additional three Elite 10 gauges with the daisy chain feature. GlowShift includes free lifetime technical support and a one year limited warranty with every Elite 10 Color Series Gauge.
Note: This gauge includes a 1/8-27 NPT thread size on the sensor and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for the installation of the sensor. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.
- 2 1/16" (52mm) Black Face Gauge with a Magnified Tinted Lens
- Water Temperature Reading from 100° to 280° Fahrenheit
- 1/8-27 NPT Electronic Water Temperature Sensor
- Peak Recall Ability
- Audible/Visual Programmable High and Low Warnings
- 10 Color LED Through Dial Lighting with Color Recall Ability
- 10 Solid Color Settings and Two Color Cycle Modes
- Dimmer Wire Allows the Gauge to Dim 30%
- 6' Water Temperature Sensor Wire
- Gauge Depth Measures 7/8"
- Dashboard Pod
- Gauge Visor
- Mounting Hardware
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty