1998-2002 Dodge Ram Cummins Full Size Dual Custom Elite Gauge Package

This GlowShift Custom Elite Series Gauge Package includes three 2 1/16th inch (52mm) Elite 10 Color Series Gauges that are available in two different options which include a black face gauge with a tinted lens or a white face gauge with a clear lens. GlowShift’s Elite 10 Color Series Gauges utilize electronic sensors and probes ensuring all readings are extremely accurate, as well as stepper motor technology which allows for smooth and precise needle movement. Also included with the Elite Gauge Series is a peak recall function that gives you instant vehicle feedback and programmable high and low warnings that will alert you visually and/or audibly if you reach high or low danger levels. Every 10 Color Series Gauge features an illuminated red needle that will sweep 270 degrees for maximum accuracy, as well as our ten color LED technology that allows you to change the backlighting color of the gauge to match your factory dash or to add a custom look to your interior. Ten solid backlight colors are available, as well as a color cycle and color fade mode, and a color recall feature is built into each gauge letting it remember the last color setting the gauge was on prior to turning the vehicle off. Listed below are the gauge types available with this package, as well as included gauge accessories. Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2013 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

The included black full size dual pillar pod is specifically designed for the 1998-2002 Dodge Ram Cummins and is easily mounted to your existing A-pillar giving your vehicle a custom fit and finish. This pod holds (2) 2 1/16" (52mm) gauges, is crafted from the highest quality ABS plastic allowing it to withstand cracking, fading, and warping. GlowShift includes a one year limited warranty and lifetime technical support with every custom gauge package that is purchased.
Note: For a proper fit, you will need to use a file to smooth out the speaker mounting location of the factory A-pillar so it is flush with the base of the pillar. This allows the gauge pod to properly fit over the factory A-pillar.