null

Chevy 350 Oil Pressure Sending Unit Adapter

Posted by Matt P. on Jun 06, 2022

Gets a little bit tricky installing an aftermarket oil pressure sensor to your Chevy Small Block 305/350. We know, we’ve been there. You don’t have a whole lot of room and sometimes it’s just a plain old hassle getting the right angle and position for installation.

Well, we got the cure for that.

GlowShift Oil Pressure Adapters for the Chevy Small Block 305/350 give you that added clearance you need. There are (2) Female 1/8-27 NPT threads set up at 45 degrees and 90 degrees respectively for the oil pressure sensor and another sensor.

End result is that you’ll save time and effort on the install. You also won’t have to drill or make any other major changes to your Chevy truck. Attach directly to the Small Block using the 1/8-27 NPT male thread and you’re ready to go.

This Chevy Small Block oil pressure sensor adapter is made out of steel with nickel plated zinc so it’s built to be durable. It’ll hold up over time and make sure you have direct access to reliable oil pressure and other readings.

Use the second sensor port to install an oil temperature sensor or another sensor type so you can monitor dual readouts if you choose. There’s also a 1/8-27 NPT Port Plug if you decide not to use one of the ports.

We’re always looking to expand our lineup of truck-specific adapters to make gauge sensor installation even easier for your make and model. When it’s time to add an oil pressure sensor to your Chevy Small Block, this oil pressure adapter fitting will get the job done for you.