Dodge Ram Cummins

6.7 Cummins Boost Gauges are designed for any 4th Generation 10-18 Dodge Ram running higher boost pressure and monitor levels from 0 to 60 PSI. A Cummins boost gauge helps you make sure that overboosting doesn’t occur which could cause problems for the turbocharger. This turbo boost gauge is a great fit for monitoring boost levels in your Cummins 2500 & 3500 when you’re getting more boost out of a stock or upgraded turbo. Set up a 6.7 Cummins boost gauge installation for newer or modified Ram trucks running boost levels in the approximate area of 45 PSI to 55 PSI.

GlowShift’s Boost Bolt Thread Adapter is specifically designed to thread directly into your 2010-2018 Dodge Cummins 6.7L Diesel’s intake horn, allowing you to easily install the barbed fitting included with your GlowShift 60 PSI boost gauge. The installation process is extremely easy with no drilling or tapping necessary.

A 6.7 Cummins Pyrometer Gauge is essential for anyone driving a 2010-2018 Dodge Ram 2500 or 3500 4th Generation truck who is pushing for maximum output out of their diesel engine. This gauge takes readings from 0 to 1500° Fahrenheit, ensuring that your exhaust temperature is not running too hot which could result in engine failure. 6.7 Cummins EGT gauges are considered one of the most important Cummins turbo diesel gauges. Readings up to 1500° apply to most Ram trucks, with this gauge typically being enough to cover the range regardless of the diesel engine size.

A Transmission Temperature Gauge is essential for any 6.7L Cummins with a 68RFE transmission, especially Ram 2500s & 3500s that are towing heavy loads. Cummins trans temp gauges allow you to closely monitor the temperature of your transmission, ensuring that it does not overheat causing significant damage. The included electronic transmission temperature sensor with 1/8-27 NPT male threads requires a T-Fitting Adapter for installation. Once the sensor is installed, this trans temp gauge will take readings from 80° to 260° Fahrenheit with pinpoint precision.

GlowShift’s Dodge Ram Cummins Transmission Line T-Fitting Adapter allows you to easily install your 1/8-27 NPT transmission temperature sensor directly to the 1/2” transmission cooler feed line for extremely accurate readings. This adapter is required on the 2010-2018 6.7L Cummins with 68RFE transmission, and is the only way to install a Transmission Temperature Gauge for these model years.

6.7 Cummins Fuel Pressure Gauges monitor lower fuel pressure levels on any 4th Gen 2010-2018 2500 & 3500 24 Valve Cummins, displaying readings from 0 to 30 PSI. This diesel fuel pressure gauge makes sure your Ram truck's fuel system is running at its peak. It also ensures that the pressure is not too low which could result in damage to the fuel pump and injectors, along with causing an overall loss of horsepower. Symptoms of low fuel pressure include rough idling, poor performance and decreased fuel economy.

GlowShift’s Big Line Kit is available for the 2010-2018 Dodge Ram 2500/3500 with a 6.7L Cummins. This kit features a ⅜” T-Fitting with ⅛-27 NPT Port and upgrades the restrictive line, enabling you to easily install any fuel pressure sensor. The 6.7L Cummins Big Line Kit will replace the restrictive line from the fuel filter housing to the injection pump in order to let your diesel truck’s fuel system flow the way it was intended. This kit is required because the 10-18 Dodge Ram has hard lines and no open ports.