Chevrolet Cobalt Gauge Pods
GlowShift Gauge Pods for the Chevrolet Cobalt are vehicle-specific pods made for several model years. Install 2-1/16” (52mm) gauges and easily view readings from an optimal location inside your Cobalt’s cabin. Each gauge pod is made out of premium quality ABS plastic and is built to be extremely durable and long lasting. Purchase pods individually or combine them with gauges to create a custom gauge set with the option of gauge accessories including adapters and wiring kits.
Gauge Pod Color
Build a GlowShift Chevrolet Cobalt Custom Gauge Package
Build a fully customizable Chevy Cobalt Gauge Package, which is a combination gauge and pod set. Start by selecting the type of gauge pod and the number of 2-1/16” (52mm) gauges it will hold. Next choose your gauges, with over 25 different types of gauges available. You will also select a Gauge Series, which gives the gauges a unique look with options including an analog or digital LED display, multiple color options for the display, a black or white gauge face, clear or tinted magnified lens, and more. The final step is deciding if you also want to add optional gauge accessories, including wiring harnesses and adapters, which will make the installation process even easier.
Recommended Gauges for Chevy Cobalt Custom Gauge Packages
For GlowShift’s Chevrolet Cobalt Gauge Sets, our Tech Team recommends any combination of our Boost Gauge, Wideband Gauge, Oil Pressure Gauge and Fuel Pressure Gauge. You’ll be able to monitor key engine systems for your Chevy Cobalt to ensure that performance is optimal and that levels are where they should be. These gauges measure 2-1/16” (52mm) each and are designed to fit seamlessly in any of our 05-10 Chevy Cobalt gauge pods. Everything required for installation is provided, and detailed instructions will walk you through the installation and wiring process.
Vehicle Specific GlowShift Gauge Pods for the Chevy Cobalt
GlowShift Cobalt SS gauge pods are designed for specific model years including the 2005-2010 Chevy Cobalt. There is no such thing as “One Size Fits All” at GlowShift, and these are not universal gauge pods that have been rebranded for a specific vehicle. When creating a gauge pod for a year range of this Chevrolet model, each pod goes through an extensive manufacturing process to ensure that it is an exact fit. When we manufacture gauge pods, our primary goal from start to finish in the design process is ensuring that each pod precisely matches the make and model it was built for in every aspect. These gauge pods are also constructed using premium quality ABS plastic to withstand cracking, fading and warping. Depending on the style you choose, select the number of 2-1/16” (52mm) gauges to install. Mounting hardware required for installation is also provided to make the process near-effortless.
How Do I Install GlowShift Chevy Cobalt Gauge Pods?
Installing a Cobalt SS triple gauge pod is a breeze with GlowShift. These Cobalt pillar gauge pods are a complete replacement and will require removal of the factory A-pillar trim. Partially remove the weather stripping surrounding the factory A-Pillar. Then remove the factory A-pillar trim by removing the bolt cover using a flathead screwdriver; use a 7mm socket wrench to remove the bolt. Mark and drill a hole in the pillar pod using a 1/8” drill bit following the steps below. Place Painter’s Tape over the pod in order to mark and drill the hole without damaging the pod. Measure 1-7/8” down from the upper left side next to where the weather strip would be located and then 2-7/16” across. Connect the 2-1/16” [52mm] gauge wires to their sensors and power by following the instructions that are included with the gauges. Then install the pillar pod to the factory A-pillar support using the included screw. This screw installs through the predrilled hole on the pod. To ensure a proper fit, thread the screw into the A-Pillar support, but do not completely tighten. After these steps have been completed, reinstall the weather strip and adjust the pillar pod so that it lines up properly to the windshield. Once aligned, tighten the bolt. Your Cobalt pillar pod will be installed and ready for use in no time.
|2005||Chevrolet||Cobalt||2.2L L61/LAP, 2.4L LE5|
|2006||Chevrolet||Cobalt||2.2L L61/LAP, 2.4L LE5|
|2007||Chevrolet||Cobalt||2.2L L61/LAP, 2.4L LE5|
|2008||Chevrolet||Cobalt||2.0L Turbo, 2.2L L61/LAP, 2.4L LE5|
|2009||Chevrolet||Cobalt||2.0L Turbo, 2.2L L61/LAP, 2.4L LE5|
|2010||Chevrolet||Cobalt||2.0L Turbo, 2.2L L61/LAP, 2.4L LE5|