Subaru BRZ Gauge Pods
GlowShift Gauge Pods for the Subaru BRZ are vehicle-specific pods designed for multiple model years. Black pillar gauge pods and Subaru vent gauge pods are available which include everything needed for the installation process. Each pod is built to be reliable and long lasting, holding up to three 2-1/16” (52mm) gauges or depending on the version you select. You can also build a custom gauge package featuring gauges and pods with the option of gauge accessories such as adapters and wiring harnesses.
Gauge Series
Gauge Pod Color
GlowShift Subaru BRZ Custom Gauge Packages
Build a fully customizable GlowShift Gauge Package for your Subaru. Gauge sets are currently available for the 13 BRZ, 14 BRZ, 15 BRZ, 16 BRZ and additional models, featuring a triple pillar pod. Choose gauges from an inventory of over 25 which will deliver readings with pinpoint accuracy. Then pick a specific GlowShift Gauge Series with features including an analog or digital LED display, multiple color options for the display, a black or white gauge face, and clear or tinted magnified lens. Finally, you can add optional gauge accessories that make installation even easier. Available accessories include adapters, wiring harnesses, drill & tap kits and expandable circuits.
Recommended GlowShift Gauges for Subaru BRZ Gauge Packages
For GlowShift’s Subaru BRZ Gauge Sets, our Tech Team recommends any combination of a Boost Gauge, Wideband Gauge, Oil Pressure Gauge and Fuel Pressure Gauge to go with your Subaru BRZ gauge pod. We also manufacture an Oil Pressure and Oil Temperature Adapter made specifically for the 2017 BRZ, 2018 BRZ, 2019 BRZ, 2020 BRZ and more which simplifies the installation of oil pressure and oil temp sensors. This 1/8 BSPT Oil Sensor Thread Adapter is made from premium quality brass and allows you to install up to (2) 1/8-27 NPT oil pressure or oil temperature sensors. The adapter features a 1/8 BSPT male thread for the oil gallery port, and (2) 1/8-27 NPT female thread ports with (1) port plug and a 1/8 BSPT female thread port that is used for the factory oil pressure sensor.
GlowShift Pillar Pods for the Subaru BRZ
Subaru pillar gauge pods at GlowShift are designed for specific model years including the 17 BRZ, 18 BRZ, 19 BRZ and 20 BRZ, and mount to the factory A-pillar. A triple pillar pod is available which gives you the ability to easily view gauge readings for a quick assessment of temperature, pressure levels and more. Each pod is featured in black and is made from premium quality ABS plastic to withstand cracking, fading and warping. They can also be painted using ABS plastic paint for a fully custom fit and finish. Install the (3) 2-1/16” (52mm) GlowShift Gauges that are right for your Subaru and monitor key systems for maximum efficiency.
How Do I Install GlowShift Pillar Pods for the Subaru BRZ?
Installing a Subaru pillar pod is a breeze with GlowShift. These gauge pods are an overlay and mount to the factory A-pillar. We include color matched flush mount push-in fasteners that will make sure the pod is secure. You’ll also have installation instructions that walk you through the process step by step. Begin by removing the factory A-pillar and mock your gauge pod up to the factory A-pillar trim in the location where you are planning to mount it. Use a scoring tool to mark the location on the factory A-Pillar where you plan to mount the gauge pod with the fasteners. Install your gauges in the pod by following the instructions that are included with them. Once the gauges are installed, place the gauge pod against the factory A-pillar to see how much clearance is available for both the gauges and wire harnesses. It may be necessary to drill a hole in the factory A-pillar to allow the wires from the gauge to pass through. Connect the gauge wires to the power and sensor wires as per the instructions included with the gauges. With the gauge pod placed on the factory A-pillar, make sure it is properly aligned with the scoring marks you made, and drill a 7/32” hole at the marked locations through the pod and the factory A-pillar. Install the BRZ gauge pod to the factory A-pillar using the fasteners by pressing them in firmly. If you do not want to use the fasteners, you can also use Velcro or double-sided tape to mount the gauge pod to the A-pillar. Finally, reinstall the factory A-pillar with the installed gauge pod.
Fitment Details
| Year | Make | Model | Engine |
|---|---|---|---|
| 2013 | Subaru | BRZ | 2.0L |
| 2014 | Subaru | BRZ | 2.0L |
| 2015 | Subaru | BRZ | 2.0L |
| 2016 | Subaru | BRZ | 2.0L |
| 2017 | Subaru | BRZ | 2.0L |
| 2018 | Subaru | BRZ | 2.0L |
| 2019 | Subaru | BRZ | 2.0L |
| 2020 | Subaru | BRZ | 2.0L |