Dodge Ram Cummins

5.9 Cummins Boost Gauges can be added to any 94-97 Cummins running a stock turbo, giving you the ability to easily monitor your Dodge Ram’s boost levels from 0 to 35 PSI. Stock levels run at about 15-20 PSI, but with a tuned 5.9L Cummins diesel engine those boost pressure levels typically run from 30-35 PSI, which is why the 35 PSI turbo boost gauge is an ideal fit. However, for additional aftermarket turbo and modifications a 60 PSI boost gauge is strongly recommended since it gives drivers more flexibility in the future.

The 1500° F Pyrometer EGT Gauge is essential for anyone driving a 1994-1997 Dodge Ram 12v 5.9L Cummins 2500 & 3500 who is pushing for maximum output from their diesel engine. This Cummins EGT gauge will ensure that your exhaust temperature is not running too hot which could result in turbo failure. This pyrometer exhaust gas temperature gauge will take readings from 0 to 1500° Fahrenheit with pinpoint precision. Drill and tap the exhaust manifold to 1/8-27 NPT and thread in the included EGT Probe. Using this method will provide you with extremely accurate temperature readings.

A Transmission Temperature Gauge is essential for any 2nd Generation 5.9L Cummins with an automatic 47RH or 47RE transmission. The gauge allows you to closely monitor the temperature of your transmission, ensuring that it does not overheat causing significant damage. Once you connect the included electronic transmission temperature sensor with 1/8-27 NPT male threads, this Cummins trans temp gauge will take readings from 80° to 260° Fahrenheit with pinpoint precision. The sensor installs to your transmission test port or in place of the stock sensor.

GlowShift’s 1/8-27 NPT Transmission Test Port Extender is required when installing any of our transmission temperature gauges to 5.9L Cummins 47RH and 47RE transmissions. If this extender is not installed, your 94-97 Ram’s internal transmission parts will break the sensor which could result in major damage. This 1/8-27 NPT adapter will extend the transmission test port, allowing you to easily install your transmission temperature gauge’s temperature sensor.

A 5.9 Cummins Fuel Pressure Gauge monitors lower fuel pressure levels on any 1994-1997 Ram truck, displaying readings from 0 to 30 PSI. This diesel fuel pressure gauge kit for 5.9 Cummins makes sure your fuel system is running at its peak, and also ensures the pressure is not too low which could result in damage to your fuel pump and injectors. The 5.9 Cummins fuel pressure gauge kit comes with a 1/8-27 NPT electronic fuel pressure sensor which enables you to take extremely accurate readings. Please also note that a snubber valve is required when installing this gauge into a 94-97 Dodge Ram Cummins.

This adapter is available for the 12v 5.9L Cummins, allowing you to easily install your fuel pressure sensor directly to the fuel filter housing with the protection of the snubber valve. Benefits of this all-in-one design include less fittings and less chances of leaks, along with better clearance of the frame rails.