1.888.GS.GAUGE
Mon-Fri 9:00 AM-5:00 PM EST
Mon-Fri 9:00 AM-5:00 PM EST
In Stock & Ready to Ship
Most Orders Placed by 3PM EST Ship Same Day
(Except Weekends & Holidays)
GlowShift Classic Series Cluster Dashboard Panel 6 Gauge Packages customize the interior of the 1982-1989 Chevrolet Camaro. Included is a vehicle-specific 3rd Gen Camaro Dash Panel with a modern factory finish that is featured in OEM black. This vintage gauge set also comes with Classic Series 3-3/8" (85mm) Speedometer and RPM Tachometers plus (4) 2-1/16” (52mm) Classic Gauges of your choice. Enhance the look of Berlinetta, RS, Z28 and IROC-Z trims for this timeless pony car.
The Classic Series delivers a vintage style gauge with premium modern parts. Start by choosing between (3) unique analog faceplate designs: Black, White or Antique White, each offering a clean, simple, and elegant look. These classic gauges for cars and trucks have black or white analog tick marks, a black or white classic needle, a flat clear lens and chrome trim ring. Every electronic gauge features LEDs that are uniquely tuned to its specific style: the Antique White option offers a softer, warmer glow, while the other two versions showcase brighter, more traditional white LEDs. Nighttime Dimming Mode dims the brightness 30% to reduce glare for optimal viewing after sundown.
Features
|
Timeless Design
|
Backlighting
|
SpeedometerSpeedometer reads your Camaro’s driving speed from 0 to 140 MPH with pinpoint accuracy. Each speed gauge is equipped with an Odometer and (2) Resettable Trip Meters. Plug a GPS Sensor Antenna into the back of this In Dash Speedometer without needing a converter. |
TachometerRPM Tachometers accurately read from 0 to 10,000 RPM. These RPM tach gauges are optimal for any driver building a custom dashboard or replacing a stock tachometer. Time your shift perfectly and guard against unnecessary transmission wear to improve engine performance. |
|
Oil Pressure GaugeOil Pressure Gauge reads your engine oil pressure from 0 to 100 PSI with unrivaled accuracy to let you know immediately if levels are where they should be. Monitor your vehicle’s oil pressure in real time ensuring the bearings, crankshaft and other critical engine parts stay properly lubricated. |
|
Water Temp GaugeWater Temperature Gauge reads your pony car’s coolant temperature from 100° to 300° Fahrenheit to catch any unusual dips or spikes. This coolant temp gauge helps you make sure that your Chevy Camaro’s engine doesn’t overheat with responsive readings that deliver instant feedback. |
|
Fuel Level GaugeFuel Level Gauge accurately reads the amount of fuel in your Camaro’s tank in standard increments of Empty, 1/4, 1/2, 3/4, and Full. The back of this automotive fuel tank gauge has a Resistance Adjuster so you can select from 9 different OHM Resistance Levels for your specific application. |
|
Volt GaugeVolt Gauge monitors your 3rd Gen Camaro’s electrical system from 8 to 18 volts, measuring the levels of your vehicle’s power supply to make sure it is providing a proper charge. This auto volt gauge will alert you instantly if there are any issues with the battery, alternator and other electrical systems. |
Customize the dash of any 1982-1989 Chevy Camaro with a GlowShift 6 Gauge Direct Replacement Camaro Dash Panel. This factory fitted 3rd Gen Camaro gauge pod matches the look and texture of the stock cluster to keep the appearance of the original dash. Each direct bolt-in replacement cluster dashboard panel holds (2) 3-3/8” (85mm) and (4) 2-1/16” (52mm) gauges. Seamlessly replace stock gauges or a damaged factory panel for this classic pony car with Berlinetta, RS, Z28 and IROC-Z trims.
Each 6 Gauge Cluster Dashboard Pod has a factory texture for factory mounting and is featured in OEM black. This 1982-1989 Chevy Camaro Dash Panel is manufactured using premium quality ABS plastic to withstand cracking, fading and warping. Simply use the factory hardware to install and secure this direct bolt-in replacement panel. |
(2) Green LED Turn Signals, a Check Engine Light indicator and High Beam indicator are also included for installation. Replicate the look of your stock dashboard panel while enhancing it at the same time. Detailed Installation Instructions provided will walk you through the entire process step by step. |
This Chevy Camaro dash gauge set comes with required sensors depending on the specific 3rd Gen Camaro Gauges you select. The RPM Tach Gauge and Speedometer MPH Gauge each feature a 2’ Power Harness with a 2’ Signal Wire. Mounting Hardware and Mounting Brackets are also provided in addition to detailed step-by-step Instructions that walk you through the entire installation process. Included Gauge Visors will help block out sun glare as you’re viewing gauge readings. |
The included wiring kit combines Sensor and Power wires into one instead of using separate harnesses for each gauge. Power and sensor harnesses included seamlessly snap into the back of their respective gauges by utilizing Plug and Play Connectivity. The Power Wiring Kits feature Ground, Switched 12v, Constant 12v, and Headlight connections. With extended wire lengths you’ll have added flexibility as you install the dash panel Camaro gauge pod and automotive gauge set.
Build a custom gauge and pod set for your classic pony car combining a Direct Bolt-In Replacement Dashboard Panel and 3rd Gen Camaro Gauges. If your factory Camaro dash panel has been worn or damaged over time, you can upgrade to this modern replacement. There is no need for external bolts or screws since you can simply reuse the factory hardware. You can also swap out faulty stock Camaro gauges and upgrade them to the Classic Series which brings modern gauge updates but keeps the look of vintage gauges. This dash gauge set will enhance the interior of any Berlinetta, RS, Z28 or IROC-Z.
GlowShift is your source for cutting-edge aftermarket automotive products specially designed for cars and trucks. Shop with confidence knowing that all purchases are backed by a one year limited warranty and free lifetime tech support. You will also have access to an unrivaled customer support experience in the event you have any questions about our gauges, pods and accessories.
| Year | Make | Model | Engine |
|---|---|---|---|
| 1982 | Chevrolet | Camaro Z28 | 5.0L V8, 5.7L V8 |
| 1983 | Chevrolet | Camaro Z28 | 5.0L V8, 5.7L V8 |
| 1984 | Chevrolet | Camaro Z28 | 5.0L V8, 5.7L V8 |
| 1985 | Chevrolet | Camaro Z28 IROC-Z | 5.0L V8, 5.7L V8 |
| 1986 | Chevrolet | Camaro Z28 IROC-Z | 5.0L V8, 5.7L V8 |
| 1987 | Chevrolet | Camaro Z28 IROC-Z | 5.0L V8, 5.7L V8 |
| 1988 | Chevrolet | Camaro Z28 IROC-Z | 5.0L V8, 5.7L V8 |
| 1989 | Chevrolet | Camaro Z28 IROC-Z | 5.0L V8, 5.7L V8 |
GPS Speedometer Sensor
|
16 Pulse Speedometer Adapter
|
Tachometer Signal Filter
|
HEI Tachometer Signal Filter
|
Oil Filter Sandwich Adapter
|
Adjustable Fuel Level Sensor
|
Fuel Level Sensor
|
Expandable Circuit
|
This Classic Series Cluster Dashboard Panel Gauge Package for the 3rd Generation Chevrolet Camaro comes with a handy installation guide that is available online and in print to walk you through the entire process step by step.
| Download and Print Instructions |
Select vintage gauges from a variety of different versions available with this custom Classic Series Gauge Package. You can also reference our Tech Picks at the beginning of this list for top recommendations that are specific to your classic car or truck. With classic gauges made to monitor a wide range of engine readings, GlowShift is sure to have what you’re looking for to build a custom gauge package.
Looking for an adapter that helps to simplify the install process? Or maybe you need a little more slack as you’re setting up your gauge kit. GlowShift carries a wide variety of accessories to help with the installation process for your gauge package. Choose from a diverse selection of adapters, wiring harnesses and much more that will cover everything you need and make the process even easier as you install your gauges.
