GlowShift’s 3-in-1 Diesel Combination Gauge allows you to easily monitor your diesel truck's most vital engine functions, and is essential for any diesel vehicle that is driving extended distances or towing heavy cargo. This 2 3/8"(60mm) diesel combo gauge features an analog pyrometer readout from 0 to 1500° Fahrenheit, blue digital boost pressure reading from 0 to 60 PSI, as well as giving you the choice of monitoring either your transmission, oil, or coolant temperature from 68° to 302° Fahrenheit with a second blue digital readout. This diesel gauge offers some incredible features that include stepper motor technology, 10 color through dial lighting, an easy to read illuminated red needle, as well as a magnified lens that allows you to clearly see all gauge readings.
GlowShift’s 10 color through dial LED lighting system lets you easily cycle through 10 solid color modes, along with 2 color cycle modes, and for easier night driving the gauge can be dimmed 30% when connected to your factory headlight switch. With the included color memory recall feature you don’t need to worry about adjusting the color of your gauge face every time you turn your truck on. This 3-in-1 Diesel Combination Gauge includes a type k thermocouple EGT probe with 6' of steel braided cable and a 2' sensor wire, an electronic boost sensor with 8' sensor wire, along with a 1/8-27 NPT electronic temperature sensor, with 8' sensor wire, that is used to monitor either your transmission, coolant, or oil temperature. The included 1 ½' power wire and all sensor wires feature modular connectors that easily clip into the back of the gauge ensuring your connection is completely secure. This diesel combination gauge can be mounted using the included dash pod or you can purchase GlowShift’s vehicle specific 3-in-1 A-pillar Gauge Pods and mount it directly to your truck's A-pillar for easier visibility. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.
Note: This gauge includes 1/8-27 NPT thread sizes on the included sensors and your vehicle may not come equipped with the same thread size. Additional threading adapters may be required for the installation of the sensors. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.
- 2 3/8" (60mm) Black Gauge Face with Magnified Clear Lens
- Gauge Depth Measures 1 3/8"
- Analog Pyrometer EGT Readout from 100° to 1500° Fahrenheit
- Blue Digital Boost Readout from 0 to 60 PSI
- Customizable Blue Digital Temperature Readout from 68° to 302° Fahrenheit
- Type K Thermocouple EGT Probe with 1/8-27 NPT Threads, 6' of Steel Braided Cable & 2' Sensor Wire
- Electronic Boost Pressure Sensor with 8' Sensor Wire
- Electronic 1/8-27 NPT Temperature Sensor with 8' Sensor Wire
- Stepper Motor Technology
- 10 Color LED Through Dial Lighting with Color Recall Ability
- 2 3/8" Dashboard Mounting Pod
- Gauge Visor
- Mounting and Installation Hardware
- Free Lifetime Technical Support
- One Year Limited Warranty
Showing reviews 1-4 of 5 | Next
So far so good
I have had this gauge installed for about a week and it seems to be performing its function well. EGT gauge and boost gauges seem to work correctly.
My only complaint is that the temp gauge only displays as low as 68F. I am using this as an IAT sensor in my cold side intercooler line and its already well below 68F here where I am. I basically have no idea what my IAT is at any time other than its less than 68F. This isnt a huge deal since an IAT of 68F is nothing to complain about.
Actually, my second complaint is that its a little bright in the dim mode. I have it set to Red to minimize the effects on my night vision.
Posted by Unknown on
Product arrived quickly and had everything to provide a quick and easy set up. The most difficult part was hooking up the trans temp sensor but was still extremely simple. Would recommend this product and will order again for my next truck
Posted by DAVID K. on
The gauge functions well and is neat appearing. All went well with the installation. It would have been helpful if the leads for the power were a little longer (only about 1 foot). Tech support wasn't much help.
Posted by Donald on
Everything looks great but...
I received the correct 3 in 1 gauge kit, and went to install it. I got all of the sensors and probes hooked up and run inside the cab, when I went to run the power wire I realized that the 3’ power wire it says it comes with is actually a 1’ power wire. Have to run to the store and grab some low voltage wire to finish the job off. Just wish I would have known before hand so I could have already had the wire or added on an extension kit or something.
Posted by Larry Mcfadden on
Showing reviews 1-4 of 5 | Next