Search By Vehicle

Loading... Please wait...
1998-2002 Dodge Ram Cummins Custom 7 Color Gauge Package Main

7 Color Series Triple Gauge Package for 1998-2002 Dodge Ram Cummins

12 product reviews | Write A Review
SKU:
GS-30443-7C-PKG

Maximum Purchase:
99 unit(s)
$169.99 $349.99 (You save $180.00)

  • Same Day ShippingPlace Order by 3PM Eastern

  • One Year
    Limited Warranty

  • Free Installation Support

  • Free Shipping Over $50Contiguous USA

Gauge Package Features:

7 Color Series Gauges
  • Select 3 Gauges from our Black 7, Tinted 7 & White 7 Color Gauge Series
  • 7 Color LED Backlit Illumination with Color Recall Technology
  • Multiple Automatic Color Changing Modes
  • Includes all Senders and Installation Hardware
  • One Year Limited Warranty and Lifetime Technical Support
1998-2002 Dodge Ram Triple Pod
  • Full Size Black, Gray or Tan Triple Pillar Pod
  • A-Pillar Speaker Cut Out Available
  • Holds (3) 2 1/16" (52mm) Gauges
  • Crafted from the Highest Quality ABS Plastic Available
  • Includes Mounting Hardware & Instructions
  • One Year Limited Warranty & Free Lifetime Technical Support
GlowShift 7 Color Series Gauges:

Custom Gauge Package

GlowShift’s Custom 7 Color Series Gauge Package allows you to select (3) 2 1/16" (52mm) gauges from our Black 7, Tinted 7 or White 7 Color Gauge Series, as well as including a vehicle specific triple pillar pod to mount the gauges to your factory A-pillar. Each electronically driven 7 Color Gauge utilizes electronic sensors and probes, as well as stepper motor technology to ensure extremely smooth needle movement and accurate gauge readings. 7 Color LED through dial lighting allows you to change the color of your gauge to blue, green, red, teal, white, purple or yellow and the color recall feature will remember the color the gauge was on prior to powering your vehicle down. Connecting your gauges to your headlight switch will allow the gauge to dim 30% for easier gauge monitoring during the night. GlowShift includes all sending units, mounting hardware, installation instructions, as well as free lifetime technical support and a one year limited warranty with each Custom 7 Color Gauge Package purchased. Listed below are the gauge types available with this custom gauge package, as well as optional add on gauge accessories.

Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

24v 5.9L Cummins Diesel Gauge Recommendation:

7 Color 60psi Boost Gauge
60PSI Boost Gauge
  • Mechanically Driven
  • Reads Boost from 0- 60PSI
  • Includes 9 feet of Vacuum Hose
  • Includes Compression Fittings
1500° Pyrometer EGT Gauge
1500° Pyrometer EGT Gauge
  • Includes K-Type Thermocouple Probe
  • Includes Power & Sensor Wire Harness
  • Reads Exhaust Temperature from 0-1500 Degrees Fahrenheit
7 Color Trans Temp Gauge
Transmission Temperature Gauge
  • Includes electronic temperature sensor
  • Includes power & sensor wire harness
  • Reads Transmission Temperature from 80-260 Degrees Fahrenheit
  • Recommended For Vehicles with Automatic Transmission
7 Color 30psi Fuel Pressure Gauge
30PSI Fuel Pressure Gauge
  • Includes electronic fuel pressure sensor
  • Includes power & sensor wire harness
  • Reads Fuel Pressure from 0-30 PSI

HEMI Gasoline Truck Gauge Recommendation:

2400 Exhaust Temperature Gauge
2400° Exhaust Temperature
  • Includes Electronic Exhaust Temperature Probe and Wire Harness
  • Reads Exhaust Temperature from 0-2400 Degrees Fahrenheit
100 PSI Fuel Pressure Gauge
100 PSI Fuel Pressure
  • Includes Electronic 100 PSI Pressure Sender and Wire Harness
  • Reads Fuel Pressure from 0-100 PSI
Transmission Temperature Gauge
Transmission Temperature
  • Includes Electronic Temperature Sender and Wire Harness
  • Reads Transmission Temperature from 80-260 Degrees Fahrenheit
  • Recommended For Vehicles with Automatic Transmission
Water Temperature Gauge
Water Temperature
  • Includes Electronic Temperature Sender and Wire Harness
  • Reads Coolant Temperature from 100-300 Degrees Fahrenheit
Triple Pillar Pod Options:

1998-2002 Dodge Ram Triple Pod

The included triple pillar pod is specifically designed for the 1998-2002 Dodge Ram, available in black, gray or tan with a speaker hole or without a speaker hole, and is easily mounted to your existing A-pillar giving your Ram a custom fit and finish. This pod holds (3) 2 1/16" (52mm) gauges, is crafted from the highest quality ABS plastic allowing it to withstand cracking, fading, and warping. An optional 3 gauge wiring harness is available to add to this custom gauge package, and will make the wiring of your gauges significantly easier. This 3 gauge wiring harness is 7 feet in length, and features easy to use color coded wiring along with spliced power, ground, and memory wires for all of your gauges. GlowShift includes a one year limited warranty and lifetime technical support with every custom gauge package that is purchased.
Note: For a proper fit, you will need to use a file to smooth out the speaker mounting location of the factory A-pillar so it is flush with the base of the pillar. This allows the gauge pod to properly fit over the factory A-pillar.

Fits: 1998.5, 1999, 2000, 2001 Dodge Ram 1500

Fits: 1998.5, 1999, 2000, 2001, 2002 Dodge Ram 2500 & 3500
1/8-27 NPT Drill & Tap Set
1/8-27 NPT Drill & Tap Set
  • Used for Installing EGT Probe, Boost Fittings or Boost Sensor
  • Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT
  • Includes Size R Drill Bit & 1/8 NPT Tap
Boost Bolt Adapter for 5.9L Cummins
Boost Bolt Adapter for 5.9L Cummins
  • Quick & Easy Install of Boost Hose or Sensor into the Intake Manifold
  • Replaces the Manifold Horn Bolt
  • No Drilling & Tapping Required
  • Female 1/8-27 NPT Thread for Fittings/Sensor
  • Fits 1998.5-2002 5.9L Cummins
Banjo Bolt Adapter for 12 Valve Cummins
Banjo Bolt Adapter for 12 Valve Cummins
  • Easy Install of Fuel Pressure Sensor to Injection Pump
  • Replaces the Factory Banjo Bolt
  • Includes 2 Crush Washers for Secure Fit
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1994-1998.5 Dodge Ram 12 Valve Cummins
Banjo Bolt Adapter for 24 Valve Cummins
Banjo Bolt Adapter for 24 Valve Cummins
  • Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
  • Replaces the Factory Banjo Bolt
  • Includes 2 Crush Washers for Secure Fit
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998.5-2002 Dodge Ram 24 Valve Cummins
Snubber Valve
Snubber Valve
  • Regulates, Normalizes & Eliminates Fuel Pressure Spikes During Startup
  • Protects Pressure Sensor from Spikes/Water Hammer Effect
  • Installs Between Fuel Filter Housing & Sensor
  • High-Quality Brass Design – Built to Last
  • Male & Female 1/8-27 NPT Threads
Banjo Bolt + Snubber Valve Combo for 24 Valve Cummins
Banjo Bolt + Snubber Valve Combo for 24 Valve Cummins
  • Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
  • All-in-One Design – Less Chance of Leaks Between Fittings
  • Snubber Valve Protects Pressure Sensor from Spikes/Water Hammer Effect
  • Replaces the Factory Banjo Bolt
  • Includes 2 Crush Washers for Secure Fit
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998.5-2002 Dodge Ram 24 Valve Cummins
Big Line Kit for 1998.5-2007 Dodge Ram 5.9L Cummins
Big Line Kit for 1998.5-2007 Dodge Ram 5.9L Cummins
  • Allows Installation of Fuel Pressure Sensor into Factory Fuel System
  • Replaces the Restrictive Factory Line with 3/8” Rubber Hose Between Fuel Filter Housing & Injection Pump
  • Includes 3/8” T-Fitting, 90° Fittings, AN Adapters & Hose Clamps
  • Female 1/8-27 NPT Thread Adapter on T-Fitting for Sensor
  • Fits 1998.5-2007 Dodge Ram 5.9L Cummins
Test Port Adapter for 47RE & 48RE
Test Port Adapter for 47RE & 48RE
  • Quick & Easy Install of Temperature Sensor to Transmission Test Port
  • Threads onto Temperature Sensor for Protection from Internal Transmission Parts
  • No Modifications to Transmission Necessary
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998-2002 Dodge Ram Cummins
18ft Pressure Sensor Harness
18ft Pressure Sensor Harness
  • Extends the Length of 9’ Harness Included with Gauge to 18’
  • Commonly Used on Trucks with Aftermarket Lift Pump Installed
  • Plug & Play
Expandable Circuit
Expandable Circuit
  • Quick & Easy Way to Power Gauges Directly from the Fuse Panel
  • Used for Constant & Switched 12 Volt Power for Gauges
  • Includes 4 Amp Fuse for Circuit Protection
3 Gauge Wiring Kit - Power Wires Only
3 Gauge Wiring Kit - Power Wires Only
  • Conveniently Connect all Gauge Power Wires to 1 Easy-to-Use Wire Harness
  • Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
  • Extends the Length of Power Wires Included with Gauges
  • Optional for Installation
  • 6’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
  • Compatible with 7 Color Gauge Series
  • 20 Gauge Automotive Grade Wiring
3 Gauge Wiring Kit - Power & Sensor Wires
3 Gauge Wiring Kit - Power & Sensor Wires
  • Conveniently Connect all Gauge Power & Sensor Wires to 1 Easy-to-Use Wire Harness
  • Color Matched Wires Make it Easy When Routing & Connecting Wires to their Source
  • Extends the Length of Power/Sensor Wires Included with Gauges
  • Optional for Installation
  • 3’ of Power/Ground Wires – Red, Yellow, Orange & Black Wires
  • 8’ of Sensor Wires – Blue, Brown & Green Wires
  • Compatible with 7 Color Gauge Series
  • 20 Gauge Automotive Grade Wiring
Make
Dodge
Model
Ram
Gauge Series
Tinted 7 Color Series
Gauge Series
Black 7 Color Series
Gauge Series
White 7 Color Series
Pod
Triple
Color
Black
Color
Gray
Color
Tan
Size
52mm
Year Range
1998 - 2002
Year
1998
Year
1999
Year
2000
Year
2001
Year
2002
pdf
http://glowshift.com/Install-Guides/Dodge/98-02-Dodge-Ram/index.html
GoogleTitle
GlowShift 98-02 Dodge 5.9 24 Valve Cummins Ram 2500 3500 Diesel Gauge Set - Triple Pillar Pod & Mounting Kit - 2-1/16" | 52mm - 7 Color Series Package
GlowShift | How To Install A Diesel Gauge Package Into Your 98-02 Dodge Ram 24 Valve Cummins 19:47

This GlowShift Gauges Installation video shows you how to install a GlowShift 7 Color Series Diesel Gauge Package into your 98-02 Dodge Ram 24 Valve Cummins. See this diesel set here: https://bit.ly/2Py9YaH Expandable Circuit: http://bit.ly/2tN0z82 Gauge Wiring Kit: http://bit.ly/2DcbtVB GlowShift’s Custom 7 Color Series Gauge Package allows you to select (3) 2 1/16" (52mm) gauges from our Black 7, Tinted 7 or White 7 Color Gauge Series, as well as including a vehicle specific triple pillar pod to mount the gauges to your factory A-pillar. Each electronically driven 7 Color Gauge utilizes electronic sensors and probes, as well as stepper motor technology to ensure extremely smooth needle movement and accurate gauge readings. 7 Color LED through dial lighting allows you to change the color of your gauge to blue, green, red, teal, white, purple or yellow and the color recall feature will remember the color the gauge was on prior to powering your vehicle down. Connecting your gauges to your headlight switch will allow the gauge to dim 30% for easier gauge monitoring during the night. GlowShift includes all sending units, mounting hardware, installation instructions, as well as free lifetime technical support and a one-year limited warranty with each Custom 7 Color Gauge Package purchased. Find us on social: Facebook: https://www.facebook.com/GlowShift/ Instagram: https://www.instagram.com/glowshift/ Twitter: https://twitter.com/GlowShift WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.

GlowShift | How To Install A Diesel Gauge Package Into Your 98-02 Dodge Ram 24 Valve Cummins

This GlowShift Gauges Installation video shows you how to install a GlowShift 7 Color Series Diesel Gauge Package into your 98-02 Dodge Ram 24 Valve Cummins. See this diesel set here: https://bit.ly/2Py9YaH Expandable Circuit: http://bit.ly/2tN0z82 Gauge Wiring Kit: http://bit.ly/2DcbtVB GlowShift’s Custom 7 Color Series Gauge Package allows you to select (3) 2 1/16" (52mm) gauges from our Black 7, Tinted 7 or White 7 Color Gauge Series, as well as including a vehicle specific triple pillar pod to mount the gauges to your factory A-pillar. Each electronically driven 7 Color Gauge utilizes electronic sensors and probes, as well as stepper motor technology to ensure extremely smooth needle movement and accurate gauge readings. 7 Color LED through dial lighting allows you to change the color of your gauge to blue, green, red, teal, white, purple or yellow and the color recall feature will remember the color the gauge was on prior to powering your vehicle down. Connecting your gauges to your headlight switch will allow the gauge to dim 30% for easier gauge monitoring during the night. GlowShift includes all sending units, mounting hardware, installation instructions, as well as free lifetime technical support and a one-year limited warranty with each Custom 7 Color Gauge Package purchased. Find us on social: Facebook: https://www.facebook.com/GlowShift/ Instagram: https://www.instagram.com/glowshift/ Twitter: https://twitter.com/GlowShift WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.

Product Reviews

12 product reviews
Write A Review

Showing reviews 1-4 of 12 | Next

  1. Great product

    Easy installation, looks great and works great as expected.

    Posted by on

  2. Gauges are nice...wiring kit not so much..

    When i unpacked my product and see what my wiring harness was i already knew the install was gonna suck... Only because i like to make things look good instead of having a bunch of loose wires around. I wish the wiring kit was more like my tow max gauges i have in my other truck. But other than that i like my gauges.

    Posted by on

  3. Honest,Fast,from nz

    Reliably honest fast shipping thanks alot guys for origami aswell sp awesome cheers from NZ

    Posted by on

  4. Great products

    The gauges work great and were easy to install the instructions easy to read and understand.

    Posted by on

Showing reviews 1-4 of 12 | Next

View Cart Go To Checkout

OUR EMAILS ARE CLUTCH!