Search By Vehicle

Loading... Please wait...
2006-2009 Dodge Ram Cummins Quad Custom Elite Gauge Package Main
  • 2006-2009 Dodge Ram Cummins Quad Custom Elite Gauge Package Main
  • 2006-2009 Dodge Ram Cummins Quad Custom Elite Gauge Package Gallery

Elite 10 Color Series Quad Gauge Package for 2006-2009 Dodge Ram Cummins

| Write A Review
SKU:
GS-463G-ET-PKG

Maximum Purchase:
99 unit(s)
$319.99 $449.99 (You save $130.00)

  • Same Day ShippingPlace Order by 3PM Eastern

  • One Year
    Limited Warranty

  • Free Installation Support

  • Free Shipping Over $50Contiguous USA

Gauge Package Features:

Elite 10 Color Series Gauges
  • Four Elite 10 Color Series Gauges with choice of Black Face
    with a Tinted Lens or White Face with a Clear Lens
  • Gauge Specific Sensors, Probes and Instructions
  • All Pod Mounting Hardware
  • Free Lifetime Technical Support
  • One Year Limited Warranty
2006-2009 Dodge Ram Cummins Quad Pillar Pod
  • Full Size Taupe Quad Pillar Pod
  • Holds (4) 2 1/16" (52mm) Gauges
  • Crafted from the Highest Quality ABS Plastic Available
  • Includes Mounting Hardware & Instructions
  • One Year Limited Warranty & Free Lifetime Technical Support
GlowShift Elite 10 Color Series Gauges:

Custom Gauge Package

This GlowShift Custom Elite Series Gauge Package includes four 2 1/16th inch (52mm) Elite 10 Color Series Gauges that are available in two different options which include a black face gauge with a tinted lens or a white face gauge with a clear lens. GlowShift’s Elite 10 Color Series Gauges utilize electronic sensors and probes ensuring all readings are extremely accurate, as well as stepper motor technology which allows for smooth and precise needle movement. Also included with the Elite Gauge Series is a peak recall function that gives you instant vehicle feedback and programmable high and low warnings that will alert you visually and/or audibly if you reach high or low danger levels. Every 10 Color Series Gauge features an illuminated red needle that will sweep 270 degrees for maximum accuracy, as well as our ten color LED technology that allows you to change the backlighting color of the gauge to match your factory dash or to add a custom look to your interior. Ten solid backlight colors are available, as well as a color cycle and color fade mode, and a color recall feature is built into each gauge letting it remember the last color setting the gauge was on prior to turning the vehicle off. Listed below are the gauge types available with this package, as well as included gauge accessories. Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

Cummins Diesel Gauge Recommendation:

Elite 10 Color 60 PSI Boost Gauge
60PSI Boost Gauge
  • Electronically Driven
  • Reads Boost from 0 - 60 PSI
  • Electronic Pressure Sensor
  • Includes 6ft. Sensor Harness
1500° Pyrometer EGT Gauge
1500° Pyrometer EGT Gauge
  • Electronically Driven
  • Reads Exhaust Gas Temperature from 0 - 1500 Degrees Fahrenheit
  • Includes Electronic EGT Probe
  • Includes 6ft. Steel Braided Thermocouple Wire
Elite 10 color Trans Temp Gauge
Transmission Temperature Gauge
  • Electronically Driven
  • Reads Transmission Temperature from 80 - 260 Degrees Fahrenheit
  • Includes Electronic Temperature Sensor
  • Includes 6ft. Sensor Harness
  • Recommended For Vehicles with Automatic Transmission
Elite 10 color 30psi Fuel Pressure Gauge
30PSI Fuel Pressure Gauge
  • Electronically Driven
  • Reads Fuel Pressure from
    0 - 30 PSI
  • Includes Electronic Pressure Sensor
  • Includes 6ft. Sensor Harness

Gasoline Truck Gauge Recommendation:

2200 Exhaust Temperature Gauge
2200° Exhaust Temperature
  • Electronically Driven
  • Reads Exhaust Gas Temperature from 0 - 2200 Degrees Fahrenheit
  • Includes Electronic EGT Probe
  • Includes 6ft. Steel Braided Thermocouple Wire
100 PSI Fuel Pressure Gauge
100 PSI Fuel Pressure
  • Electronically Driven
  • Reads Fuel Pressure from
    0 - 100 PSI
  • Includes Electronic Pressure Sensor
  • Includes 6ft. Sensor Harness
Transmission Temperature Gauge
Transmission Temperature
  • Includes Electronic Temperature Sender and Wire Harness
  • Reads Transmission Temperature from 80-260 Degrees Fahrenheit
  • Recommended For Vehicles with Automatic Transmission
  • Transmission Test Port Extender Recommended
Water Temperature Gauge
Water Temperature
  • Electronically Driven
  • Reads Water Temperature from 100 - 280 Degrees Fahrenheit
  • Includes Electronic Temperature Sensor
  • Includes 6ft. Sensor Harness
Quad Pillar Pod Options:

2006-2009 Dodge Ram Cummins Quad Pillar Pod

The included 2006-2009 Dodge Ram Quad Pillar Pod mounts (4) 2 1/16” (52mm) truck gauges in a factory matched taupe color pod. This quad pillar gauge pod is designed to replace the stock A-pillar and grab handle allowing you to mount your gauges for a custom look without any obstructions. The included bolt screws into the location where the grab handle was mounted for a secure fit. Each pillar pod is manufactured from high quality ABS plastic that withstands cracking, fading and warping over longtime use. GlowShift includes mounting hardware, a one year limited warranty and free lifetime technical support with each purchase.

Fits: 2006, 2007, 2008, 2009 Dodge Ram 2500 & 3500

Note: This quad pillar pod does not fit 2003-2005 Dodge Ram models with older style dashboards.
1/8-27 NPT Drill & Tap Set
1/8-27 NPT Drill & Tap Set
  • Used for Installing EGT Probe, Boost Fittings or Boost Sensor
  • Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT
  • Includes Size R Drill Bit & 1/8 NPT Tap
Boost Bolt Adapter for 5.9L Cummins
Boost Bolt Adapter for 5.9L Cummins
  • Quick & Easy Install of Boost Hose or Sensor into the Intake Manifold
  • Replaces the Manifold Horn Bolt
  • No Drilling & Tapping Required
  • Female 1/8-27 NPT Thread for Fittings/Sensor
  • Fits 1998.5-2002 5.9L Cummins
Boost Bolt Adapter for 6.7L Cummins
Boost Bolt Adapter for 6.7L Cummins
  • Quick & Easy Install of Boost Hose or Sensor into the Intake Manifold
  • Replaces the Manifold Horn Bolt
  • No Drilling & Tapping Required
  • Female 1/8-27 NPT Thread for Fittings/Sensor
  • Fits 2006.5-2018 6.7L Cummins
Banjo Bolt Adapter for 24 Valve Cummins
Banjo Bolt Adapter for 24 Valve Cummins
  • Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
  • Replaces the Factory Banjo Bolt
  • Includes 2 Crush Washers for Secure Fit
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998-2002 Dodge Ram 24 Valve Cummins
Snubber Valve
Snubber Valve
  • Regulates, Normalizes & Eliminates Fuel Pressure Spikes During Startup
  • Protects Pressure Sensor from Spikes/Water Hammer Effect
  • Installs Between Fuel Filter Housing & Sensor
  • High-Quality Brass Design – Built to Last
  • Male & Female 1/8-27 NPT Threads
Banjo Bolt + Snubber Valve Combo for 24 Valve Cummins
Banjo Bolt + Snubber Valve Combo for 24 Valve Cummins
  • Easy Install of Fuel Pressure Sensor to Fuel Filter Housing
  • All-in-One Design – Less Chance of Leaks Between Fittings
  • Snubber Valve Protects Pressure Sensor from Spikes/Water Hammer Effect
  • Replaces the Factory Banjo Bolt
  • Includes 2 Crush Washers for Secure Fit
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998.5-2002 Dodge Ram 24 Valve Cummins
Big Line Kit for 1998.5-2007 Dodge Ram 5.9L Cummins
Big Line Kit for 1998.5-2007 Dodge Ram 5.9L Cummins
  • Allows Installation of Fuel Pressure Sensor into Factory Fuel System
  • Replaces the Restrictive Factory Line with 3/8” Rubber Hose Between Fuel Filter Housing & Injection Pump
  • Includes 3/8” T-Fitting, 90° Fittings, AN Adapters & Hose Clamps
  • Female 1/8-27 NPT Thread Adapter on T-Fitting for Sensor
  • Fits 1998.5-2007 Dodge Ram 5.9L Cummins
Big Line Kit for 2007.5-2009 Dodge Ram 6.7L Cummins
Big Line Kit for 2007.5-2009 Dodge Ram 6.7L Cummins
  • Allows Installation of Fuel Pressure Sensor into Factory Fuel System
  • Replaces the Restrictive Factory Line with 3/8” Rubber Hose Between Fuel Filter Housing & Injection Pump
  • Includes 3/8” T-Fitting, Injection Pump Connectors, Push-On Hose Connectors & Hose Clamps
  • Female 1/8-27 NPT Thread Adapter on T-Fitting for Sensor
  • Fits 2007.5-2009 Dodge Ram 6.7L Cummins
Test Port Adapter for 47RE & 48RE
Test Port Adapter for 47RE & 48RE
  • Quick & Easy Install of Temperature Sensor to Transmission Test Port
  • Threads onto Temperature Sensor for Protection from Internal Transmission Parts
  • No Modifications to Transmission Necessary
  • Female 1/8-27 NPT Thread for Sensor
  • Fits 1998-2002 Dodge Ram Cummins
1/2 Transmission Cooler Line T-Fitting Adapter
1/2” Transmission Cooler Line T-Fitting Adapter
  • Allows Installation of Temperature Sensor to the 1/2" Transmission Cooler Line
  • Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal
  • Female 1/8-27 NPT Thread on T-Fitting for Sensor
  • Required When Installing Sensor to 2007.5+ Dodge Ram Cummins
  • Required When Installing Sensor to 68RE & 68RFE Transmissions
Expandable Circuit
Expandable Circuit
  • Quick & Easy Way to Power Gauges Directly from the Fuse Panel
  • Used for Constant & Switched 12 Volt Power for Gauges
  • Includes 4 Amp Fuse for Circuit Protection
Make
Dodge
Model
Ram
Gauge Series
Elite 10 Color Series
Gauge Series
White Elite 10 Color Series
Pod
Quad
Color
Taupe
Size
52mm
Year Range
2006 - 2009
Year
2006
Year
2007
Year
2008
Year
2009

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

View Cart Go To Checkout

OUR EMAILS ARE CLUTCH!