10 Color Digital Series Triple Gauge Package for 1986-1993 Dodge Ram Cummins

With GlowShift you can build a customizable triple gauge package for the 1986-1993 Dodge Ram 12v Cummins 1st Generation. This gauge package features the innovative 10 Color Digital Gauge Series which includes 10 different solid color options and an ultra-bright digital LED gauge display. GlowShift’s gauge package gives you the choice of any 3 gauges from a wide and diverse selection, and many gauges come with their required sensor. This package also includes your choice of a black pillar pod or dashboard pod mount built specifically for the first gen Cummins.

Gauge Series Details

With the 10 Color Digital Gauges Series you can choose from 10 selectable solid color options to set the color you prefer for your gauge. Another main feature of this gauge series is the sharp digital display which provides you with extremely accurate quick-glance readouts. These 2-1/16” (52mm) gauges feature a streamlined design with a flat, black gauge face and low profile tinted lens. In addition to the solid color settings, you will also have the option of a Color Cycle mode which cycles through all solid color options. The Color Fade slowly navigates and fades through each solid color option. Additional features include a Color Recall capability so that your gauge will remember the last color setting you used before it was turned off. For even better visibility at nighttime there is an easy-to-use Dimming Feature which allows you to dim the gauge 50% at night for clearer viewing. All of these options provide you with the ability to fully customize the lighting experience of these innovative digital gauges. GlowShift also includes all sensors, wiring, mounting hardware and a one-year limited warranty with each purchase.

Extremely Accurate Digital Readings Digital Numerical Readout Flat, Black Gauge Face Low Profile Tinted Lens Extremely Thin Design Quick-Glance Readings

Customizable Color Display Ultra-Bright LED Lighting 10 Solid Color Settings Blue, Red, Green, Teal, Purple, White, Yellow, Pink, Amber & Orange Color Cycle & Color Fade Modes Self-Calibration Mode at Startup

Nighttime Dimming Dimmer Wire Dims Gauge 50% Reduce Brightness When Driving at Night Continue to Easily View your Readings Works When your Headlights are Turned On Activate with a Simple Connection

Diesel Tech Picks

Our Diesel Techs have years of experience and a wealth of knowledge when it comes to choosing the gauges that will work best for your Dodge Ram Cummins. Here you’ll find their top choices based on performance, efficiency, reliability, and how effective these gauges will be in providing you with all of the information you need to get the best performance out of your truck.

60 PSI Boost Reads Boost from 0 - 60 PSI 1/8-27 NPT Electronic Pressure Sensor 9’ Sensor & 2’ Power Wire Harnesses

Transmission Temperature Reads Transmission Temperature from 68 - 302° Fahrenheit 1/8-27 NPT Electronic Temperature Sensor 2' Sensor & Power Wire Harnesses Recommended for Vehicles with Automatic Transmission Celsius Temperature Available

30 PSI Fuel Pressure Reads Fuel Pressure from 0 - 30 PSI 1/8-27 NPT Electronic Pressure Sensor 9’ Sensor & 2' Power Wire Harnesses

Exhaust Gas Temperature Reads Exhaust Temperature from 200 - 2200° Fahrenheit 1/8-27 NPT EGT Probe with 6' of Steel Braided Cable 2’ Power Wire Harness Celsius Temperature Available

Pod Details

The included full size, factory matched triple pillar pod and triple dashboard pod are both made specifically for the 1986-1993 Dodge Ram 12v Cummins 1st Gen. These gauge pods hold (3) 2-1/16” (52mm) gauges and are crafted from high quality ABS plastic, allowing them to withstand cracking, fading and warping. They can also be painted using ABS plastic paint to match your factory interior for a fully customized fit and finish. Fits: 86, 87, 88, 89, 90, 91, 92, 93 Dodge Ram, 1500, 2500, 3500, D/W 100, D/W 250, D/W 350

Holds (3) 2-1/16” (52mm) Gauges Choose Between A-Pillar or Dashboard Pod Made from ABS Plastic Withstands Cracking, Fading and Warping

Overlay of Factory A-Pillar Mount to A-Pillar or Dashboard Tailor-made for 1st Gen Cummins Professional Fit and Finish

Push-In Fasteners for A-Pillar Pod Mounting Screw for Dash Pod Drill to Install Easy to Install

Fitment Details

1/8-27 NPT Drill & Tap Set Used for Installing EGT Probe, Boost Fittings or Boost Sensor Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT Includes Size R Drill Bit & 1/8 NPT Tap	Banjo Bolt Adapter for 12 Valve Cummins VE PUMP Easy Install of Fuel Pressure Sensor to Fuel Filter Housing Replaces the Factory Banjo Bolt Includes 2 Crush Washers for Secure Fit Female 1/8-27 NPT Thread for Sensor Fits 1989-1993 Dodge Ram 12 Valve Cummins with VE PUMP	Snubber Valve Regulates, Normalizes & Eliminates Fuel Pressure Spikes During Startup Protects Pressure Sensor from Spikes/Water Hammer Effect Installs Between Fuel Filter Housing & Sensor High-Quality Brass Design – Built to Last Male & Female 1/8-27 NPT Threads	Test Port Adapter for A727 Quick & Easy Install of Temperature Sensor to Transmission Test Port Threads onto Temperature Sensor for Protection from Internal Transmission Parts No Modifications to Transmission Necessary Female 1/8-27 NPT Thread for Sensor Fits Dodge Ram Cummins with A727 Transmission
1/2” Transmission Cooler Line T-Fitting Adapter Allows Installation of Temperature Sensor to the 1/2" Transmission Cooler Line Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal Female 1/8-27 NPT Thread on T-Fitting for Sensor	Oil Filter Sandwich Adapter Quick & Easy Solution to Install Multiple Sensors to the Truck’s Oil Filter Used for Oil Pressure & Oil Temperature Sensors Features a 1”-16 Thread, (4) 1/8-27 NPT Thread Ports & Port Plugs Includes O-Ring for Leak-Free Seal Fits 1989-2018 Dodge Ram 5.9L 6.7L Cummins	Expandable Circuit Quick & Easy Way to Power Gauges Directly from the Fuse Panel Used for Constant & Switched 12 Volt Power for Gauges Includes 4 Amp Fuse for Circuit Protection