GlowShift's 10 Color Digital Series Triple Gauge Package was made for the 2008-2015 Mitsubishi Lancer Evolution X. This gauge package features the innovative 10 Color Digital Gauge Series which includes 10 different solid color options and an ultra-bright digital LED gauge display. GlowShift’s triple gauge package gives you the choice of any 3 gauges from a wide and diverse selection, and many gauges come with their required sensor. This package also includes a gray full size triple pillar pod to mount the gauges to the A-pillar.
Gauge Series Details
With the 10 Color Digital Gauges Series you can choose from 10 selectable solid color options to set the color you prefer for your gauge. Another main feature of this gauge series is the sharp digital display which provides you with extremely accurate quick-glance readouts. These 2-1/16” (52mm) gauges feature a streamlined design with a flat, black gauge face and low profile tinted lens. In addition to the solid color settings, you will also have the option of a Color Cycle mode which cycles through all solid color options. The Color Fade slowly navigates and fades through each solid color option. Additional features include a Color Recall capability so that your gauge will remember the last color setting you used before it was turned off. For even better visibility at nighttime there is an easy-to-use Dimming Feature which allows you to dim the gauge 50% at night for clearer viewing. All of these options provide you with the ability to fully customize the lighting experience of these innovative digital gauges. GlowShift also includes all sensors, wiring, mounting hardware and a one-year limited warranty with each purchase.
Extremely Accurate Digital Readings
- Digital Numerical Readout
- Flat, Black Gauge Face
- Low Profile Tinted Lens
- Extremely Thin Design
- Quick-Glance Readings
|
Customizable Color Display
- Ultra-Bright LED Lighting
- 10 Solid Color Settings
- Blue, Red, Green, Teal, Purple, White, Yellow, Pink, Amber & Orange
- Color Cycle & Color Fade Modes
- Self-Calibration Mode at Startup
|
Nighttime Dimming
- Dimmer Wire Dims Gauge 50%
- Reduce Brightness When Driving at Night
- Continue to Easily View your Readings
- Works When your Headlights are Turned On
- Activate with a Simple Connection
|
Tech Picks
Our Techs have years of experience and a wealth of knowledge when it comes to choosing the gauges that will work best for your Mitsubishi Evo X. Here you’ll find their top choices based on performance, efficiency, reliability, and how effective these gauges will be in providing you with all of the information you need to get the best performance out of your vehicle.
Boost/Vacuum
- Reads Boost from 0 - 45 PSI
- Reads Vacuum from (-30) - 0 inHG
- 6' of Clear PVC Hose & Restricted T-Fitting
- 6’ Sensor & 2’ Power Wire Harnesses
|
Oil Pressure
- Reads Oil Pressure from 0 - 145 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
|
100 PSI Fuel Pressure
- Reads Fuel Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
|
Wideband Air/Fuel Ratio
- Reads Air/Fuel Ratio from 10.00 - 20.00 AFR
- Wideband Oxygen Sensor
- Digital Wideband Controller Unit with Data Logging
- Weld-In Sensor Bung
- Power & Sensor Wire Harnesses
|
Pillar Pod Details
The included gray triple pillar gauge pod is made specifically for the 2008-2015 Mitsubishi Lancer Evolution X and can be mounted to the factory A-pillar with the hardware that is also provided as part of this gauge package. This Evo X pillar gauge pod holds (3) 2-1/16” (52mm) gauges and is crafted from high quality ABS plastic, allowing it to withstand cracking, fading and warping. The pod also features a UV protective coating that preserves the color from exposure to sunlight so that it always matches the factory trim of the truck.
Fits: 08, 09, 10, 11, 12, 13, 14, 15 Mitsubishi Lancer Evolution X.
- Holds (3) 2-1/16” (52mm) Gauges
- Gray Triple Pillar Pod
- Made from ABS Plastic
- Withstands Cracking, Fading and Warping
|
- Overlay of Factory A-Pillar
- Full Length Gauge Pod
- Match to Your Factory Interior
- Professional Fit and Finish
|
- Push-In Fasteners
- Color Matched to Pod
- Drill to Install
- Easy to Install Pod
|
Fitment Details
Year |
Make |
Model |
Engine |
2008 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2009 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2010 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2011 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2012 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2013 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2014 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
2015 |
Mitsubishi |
Lancer Evolution X |
2.0L 4B11T |
Oil Filter Sandwich Adapter
- Quick & Easy Solution to Install Multiple Sensors to Vehicle’s Oil Filter
- Used for Oil Pressure & Oil Temperature Sensors
- Features (4) 1/8-27 NPT Thread Ports & Port Plugs
- Includes O-Ring for Leak-Free Seal
|
Boost/Vacuum
Oil Pressure
100 PSI Fuel Pressure
Wideband Air/Fuel Ratio
Installation Guides
This 10 Color Digital Series Triple Gauge Package comes with product instructions that provide complete details on how to install your gauges and pod for the 2008-2015 Mitsubishi Lancer Evolution X. You can also visit our library of installation videos which include complete step-by-step tutorials and useful tips on how to install a wide range of GlowShift gauges and pods.
GlowShift Support Center
Select Your Gauges
Select your gauges from a variety of different gauge types below which are available for this custom 10 Color Digital Gauge Series Package. You can also reference our Tech Picks at the beginning of this list for our top recommendations that are specific to this vehicle. With gauges made to monitor a wide range of engine applications, GlowShift is sure to have the gauge types you’re looking for as part of this custom package.
- Reads Boost from 0 - 45 PSI
- Reads Vacuum from (-30) - 0 inHG
- 6' of Clear PVC Hose & Restricted T-Fitting
- 6’ Sensor & 2’ Power Wire Harnesses
- Reads Boost from 0 - 60 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2’ Power Wire Harnesses
- Reads Oil Pressure from 0 - 145 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Exhaust Temperature from 200 - 2200° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 6' Sensor & 2' Power Wire Harnesses
- Waterproof EGT Probe to Sensor Harness Connector
Dual Exhaust Gas Temperature
- Reads Exhaust Temperature from 200 - 2200° Fahrenheit
- (2) 1/8-27 NPT EGT Probes with 3' of Steel Braided Cable
- (2) 6’ Sensor & 2’ Power Wire Harnesses
- Reads Fuel Pressure from 0 - 30 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Fuel Pressure from 0 - 100 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Transmission Temperature from 68 - 302° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Sensor & Power Wire Harnesses
- Recommended for Vehicles with Automatic Transmission
Water (Coolant) Temperature
- Reads Coolant Temperature from 68 - 302° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Sensor & Power Wire Harnesses
- Reads Oil Temperature from 68 - 302° Fahrenheit
- 1/8-27 NPT Electronic Temperature Sensor
- 2' Sensor & Power Wire Harnesses
- Reads Air/Fuel Ratio from 10.00 - 20.00 AFR
- Wideband Oxygen Sensor
- Digital Wideband Controller Unit with Data Logging
- Weld-In Sensor Bung
- Power & Sensor Wire Harnesses
Dual Wideband Air/Fuel Ratio
- Reads Left & Right Bank Air/Fuel Ratio from 10.00 - 20.00 AFR
- 2 Wideband Oxygen Sensors
- 2 Digital Wideband Controller Units with Data Logging
- 2 Weld-In Sensor Bungs
- Power & Sensor Wire Harnesses
Narrowband Air/Fuel Ratio
- Reads Air/Fuel Ratio from 10.0 to 20.0 AFR
- 2’ Power Harness
- Reads Air Pressure from 0 - 200 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Air Pressure from 0 - 200 PSI
- (2) 1/8-27 NPT Electronic Pressure Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
- Reads Vehicle Electrical System Voltages from 8 - 18 DC Volts
- 2' Power Wire Harness
- Reads Nitrous Pressure from 10 - 1,600 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Outside Air Temp from -40 - 200° Fahrenheit
- Electronic Temperature Sensor
- 18’ Sensor & 2' Power Wire Harnesses
- Reads Vehicle’s Fuel Level from 0 - 100%
- 10 Adjustable OHM Resistance Levels
- 2' Power Wire Harness
- Reads Vehicle’s RPM from 0 - 10,000
- 1 - 10 Cylinder Setting Switch on Back of Gauge
- 2' Tachometer Source & 2’ Power Wire Harnesses
- Compatible with Gasoline Vehicles Only
- Reads Vehicle Driving Speed from 0 - 140 MPH
- 2' Power & 6’ Signal Wire Harness
- Reads Transmission Pressure from 0 - 400 PSI
- 1/8-27 NPT Electronic Pressure Sensor
- 9’ Sensor & 2' Power Wire Harnesses
- Reads Hot & Cold Sides of Intake from 0 - 300° Fahrenheit
- (2) 3/8-18 NPT Electronic Temperature Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
Dual Boost/Vacuum & Pressure
- Reads Boost/Vacuum from -30 inHG - 45 PSI
- Reads Oil or Fuel Pressure from 0 - 100 PSI
- Electronic Boost/Vacuum Sensor
- 1/8-27 NPT Electronic Pressure Sensor
- (2) 9’ Sensor & 3' Power Wire Harnesses
Dual Boost/Vacuum & Temperature
- Reads Boost/Vacuum from -30 inHG - 45 PSI
- Reads Oil, Water or Transmission Temp from 68 - 302° Fahrenheit
- Electronic Boost/Vacuum Sensor
- 1/8-27 NPT Electronic Temperature Sensor
- (2) 9’ Sensor & 3' Power Wire Harnesses
Dual Boost/Vacuum & Wideband Air/Fuel Ratio
- Reads Boost/Vacuum from -30 inHG - 45 PSI
- Reads Air/Fuel Ratio from 10.00 - 20.00 AFR
- Electronic Boost/Vacuum Sensor
- Wideband Oxygen Sensor
- Digital Wideband Controller Unit with Data Logging
- Power & Sensor Wire Harnesses
- Reads Combo of Boost, Oil, Fuel Pressure from 0 - 100 PSI
- (2) 1/8-27 NPT Electronic Pressure Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
- Reads Combo of Oil, Water or Transmission Temp from 68 - 302° Fahrenheit
- (2) 1/8-27 NPT Electronic Temperature Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
Dual Temperature & Pressure
- Reads Oil, Water or Transmission Temp from 68 - 302° Fahrenheit
- Reads Boost, Oil or Fuel Pressure from 0 - 145 PSI
- (2) 1/8-27 NPT Electronic Temperature & Pressure Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
Dual Boost & Exhaust Gas Temp Gauge
- Reads Boost from 0 - 60 PSI
- Reads Exhaust Temperature from 200 - 2200° Fahrenheit
- 1/8-27 NPT Electronic Pressure Sensor
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- Power & Sensor Wire Harnesses
Dual Exhaust Gas Temp & Temp Gauge
- Reads Exhaust Temperature from 200 - 2200° Fahrenheit
- Reads Oil, Water or Transmission Temp from 68 - 302° Fahrenheit
- 1/8-27 NPT EGT Probe with 3' of Steel Braided Cable
- 1/8-27 NPT Electronic Temperature Sensor
- Power & Sensor Wire Harnesses
Dual Transmission Pressure & Transmission Temperature
- Reads Transmission Pressure from 0 - 400 PSI
- Reads Transmission Temp from 68 - 302° Fahrenheit
- (2) 1/8-27 NPT Electronic Pressure & Temperature Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
Dual Pressure & Nitrous Pressure Gauge
- Reads Boost, Oil or Fuel Pressure from 0 - 100 PSI
- Reads Nitrous Pressure from 0 - 1,600 PSI
- (2) 1/8-27 NPT Electronic Pressure Sensors
- (2) 9’ Sensor & 2' Power Wire Harnesses
- Displays the Time of the Day in 12-Hour or 24-Hour Increments
- 2' Power Wire Harness
Optional Installation Accessories
Looking for an adapter that helps to simplify the install process? Or maybe you need a little more slack as you’re setting up your gauge kit. GlowShift carries a wide variety of accessories to help with the installation process for your gauge package. Choose from a diverse selection of adapters, wiring harnesses and much more that will cover everything you need and make the process even easier as you install your gauges.