FREE SHIPPING ON ALL ORDERS OVER 50*
GlowShift’s Black 7 Color Series 3-3/4" In-Dash Tachometer Gauge offers ultra-high performance features, making it perfect for anyone building a custom dash or replacing their stock tachometer in a 1 through 10 cylinder gas powered vehicle. This tachometer gauge reads from 0 to 10,000 RPM with incredible accuracy and ensures you are shifting at the appropriate time, also protecting against unnecessary transmission wear.
Black 7 Color Gauge Series
GlowShift’s Black 7 Color Gauge Series comes standard with features including a black gauge face, magnified clear lens and illuminated red needle that sweeps 270 degrees for maximum accuracy. These gauges also come equipped with stepper motor technology which gives each auto gauge tachometer the perfect combination of incredibly accurate readings and extremely smooth needle movement. The Black 7 Color Gauge Series includes the ultra-bright LED solid color modes Blue, Green, Red, Teal, Yellow, Purple and White. With GlowShift’s 7 color LED through dial lighting system you can select and change the color of your gauge lighting display by simply pressing the button located along the front of the gauge. By taking advantage of the 7 Solid Color Settings and 2 Color Cycle Modes that utilize all of these radiant LED colors, you can fully customize the color of this tach gauge and add your own personal touch to the inside of your vehicle. Choose to either match your factory dash lights, or you can create a unique, original lighting pattern. Since a Color Memory option is built in, you won’t have to reset the color of your gauge every time you turn on your vehicle. It will reflect your most recent color setting the next time it is active. By connecting the orange wire of your gauge to the factory headlight switch, you’ll be able to dim the gauge 30% when your headlights are turned on to reduce the brightness of your gauges while driving at night.
Works with Gasoline Engines
GlowShift’s tachometer gauges are a great addition to any vehicle with a gas engine. A tach gauge’s measurements show the rate of rotation of an engine’s crankshaft while also usually indicating a safe range of rotation speeds. Among the many benefits is helping a driver choose the best throttle and gear settings depending on the type of road conditions. Some engines produce most of their torque at lower RPMs, and experience lower torque as RPMs increase. Other motors must spin very quickly to produce the most power, which can often be seen in smaller gasoline engines. By knowing at which RPM rate your engine produces the most power using a tachometer gauge, you’ll be able to get better performance out of your vehicle.
Tachometer Gauge Installation
GlowShift’s Black 7 Color Series 3 3/4 Inch In-Dash Tachometer can be mounted directly into your dashboard with the available mounting bracket, and is installed using the tachometer gauge wiring provided. The included 2’ power and signal wire can be connected to either the negative side of your coil, your tachometer test port, or to a tach adapter. Please note that a tachometer signal filter may be needed to complete your installation. For vehicle specific installation questions please contact our technical support department. The included wiring is also completely Plug and Play, and securely snaps into the back of the gauge with the featured modular connectors. The goal is to give you the best tachometer gauge for your vehicle, and a seamless installation is part of that process. Instructions are also provided that will walk you through the entire installation step-by-step.
External 7 Color LED Shift Light
The included external shift light will illuminate with the 7 Color option of your choice whenever the set shift point RPM is reached. The gauge also has a built-in red shift light that functions the same way as the external shift light whenever the shift point RPM is reached. To set the shift point, press and hold the “set” button on the gauge face for 5 seconds until the needle displays the current set shift point. Press the “set” button to increase the RPM setting and press the “color” button to decrease the RPM setting.
Note: Our Tachometers are only designed for a gasoline, single coil application. For multiple coil applications, the use of a multiple coil or aftermarket ignition system adapter is required. Vehicles equipped with High Energy Ignition Systems (HEI) will require GlowShift’s HEI Signal Filter.
GlowShift includes a one year limited warranty and free lifetime tech support with every purchase.
On Dash Pedestal Mounting Bracket
Includes an installation guide which is available online and included with your order. You can also visit our library of installation videos which include complete step-by-step tutorials and useful tips on how to install a wide range of GlowShift products.
|Download and Print the PDF||View Our Help Center|