1/8-27 NPT Aluminum Weld In Bungs Install to Aluminum Surfaces In Your Vehicle

Posted by Matt P. on May 12, 2022

Aluminum Weld In Bung
  • Weld In Aluminum Bung
  • Install Temp & Pressure Senders
  • Attach to Most Aluminum Surfaces
  • 1/8-27 NPT Sensor Port
  • Use on Oil Pans
  • Add to Aluminum Diff Cover
  • Drill a 19/32” Hole to Install
  • Direct Access to Readings

We have a bunch of different Weld In Bungs in stock that give you the ability to install many types of car and truck gauge sensors. Up until now, we’ve been making them mainly out of steel.

But with our newest Bung Adapter we decided to go with aluminum, giving drivers the ability to install them on pretty much any aluminum surface in their vehicle. This 1/8-27 NPT Aluminum Weld In Bung gives you direct access to your source for gauge readings. You can install all kinds of standard 1/8-27 NPT sensors.

We came up with the idea when a customer wanted to install a differential temperature sensor to a diff cover. So we decided to make one.

We started by machining these weld in aluminum bungs using premium quality material so they’re built to be durable and reliable. Then we did tests on several vehicles to make sure they were getting the job done. The end result is a universal aluminum weld in bung that can be used for a diff temp sensor, oil temp or oil pressure sensor and more.

Basically you drill a 19/32” hole to gain access to the source. Once you weld the adapter you’ll have the sensor port. Simply thread it in, run the sensor wiring connections to your car or truck’s gauge, and you’re good to go.

If you have any questions about these aluminum weld in pipe bungs, reach out to us anytime. Unrivaled Customer Support and Free Lifetime Tech Support come standard for our customers. Not to mention we’re happy to assist anytime.