2-5/8” (65mm) Mechanical Oil Pressure Gauge for Racing
Posted by Matt P. on Aug 28, 2024
- Mechanical Oil PSI Gauge
- 6’ of 1/8” Copper Hose
- 1/8-27 NPT Compression Ferrule Fittings
- 1/4 NPT Adapter
- Black & White Racing Series
- 2-5/8" (65mm) Analog Gauges
- Black Gauge Face & White Illumination
- Flat Clear Lens
Hook up your racing application with a GlowShift Mechanical Oil Pressure Gauge for cars and trucks and catch any unusual dips and spikes in pressure.
The mechanical oil pressure gauge kit comes with 6’ of 1/8” Copper Hose, 1/8 NPT Compression Ferrule Fittings, and a 1/4 NPT Adapter for the mechanical oil pressure gauge install. There’s also a 2’ Power Wire attached to the back of the gauge with Power, Ground and Dimming Wires.
We also have a 9’ Copper Hose that’s available separately for additional length. So no matter what kind of application you have, we can get the gauge working.
As part of our Black & White Racing Series, this drag racing gauge looks great too. The larger 2-5/8” (65mm) gauge face makes it easier to view readings at different angles. There’s a black gauge dial with white analog LED illumination for readouts and an illuminated red needle.
Nighttime Dimming Mode dims the gauge 30% at night for easy viewing of readings. To activate, all you need to do is run the corresponding gauge wire to the headlight switched source.
We made an oil pressure mechanical gauge for any driver putting added stress on their car or truck’s engine. You’ll be able to take accurate readings from 0 to 100 PSI to make sure the bearings, crankshaft and other critical parts stay properly lubricated.
If you’re looking to switch out stock gauges or build a custom dash and you need the best mechanical oil pressure gauge for your vehicle, we made this drag racing gauge for you. Protect your engine and enhance the look of your car or truck at the same time.