Aftermarket Fuel Level Sensors For Custom Work On Your Application
Posted by Matt P. on Apr 21, 2022
- Fuel Tank Level Sensors
- 6", 8", 10" & 12" Sizes
- For Virtually Any Car or Truck
- Add to Aftermarket Modifications
- For New or Custom Fuel Tanks
- Great with Custom Dashboards
- Connect to Upgraded Fuel Level Gauges
- 3' Sensor Wire Attached
An upgraded fuel level gauge is key when you’re thinking about replacing a stock gauge or working on a custom dash for your car or truck. At GlowShift we have analog and digital LED gauges that’ll go great with any modifications you’re working on.
Anytime you switch out a fuel gauge we also recommend upgrading the fuel level sensor. If you get a new fuel tank or a custom tank, there’s a good chance you’ll need an aftermarket fuel level sensor. They’re also the perfect replacement if your factory fuel level sender isn’t working properly.
That’s why we just signed off on brand-new Fuel Level Sensors that work universally with any vehicle. We put a lot of time and effort into this sender and we’re really proud of how it turned out. Each fuel sensor can be used with custom fuel cell applications like race cars, trucks running long distances, and basically any vehicle that has undergone aftermarket modifications.
By developing this fuel sender, our goal was to make sure you had everything you needed in one place. So instead of getting a fuel gauge and then having to track down a sensor somewhere else, you’ll have everything you need right here under the GlowShift name.
This fuel tank level sensor has a slim one-piece design with a float that sends the electronic signal to the fuel gauge. It outputs 240-33 Ohm and has a wiring harness attached with a mounting bracket for installation. We have four different sizes available: 6”, 8”, 10” & 12”. Just make sure to get the right size for your application’s fuel tank.
The mounting bracket is tough and sturdy to make sure the sensor is locked in place. You get fixed hardware so the bolts won’t fall in the tank, and the bolt pattern is set up for a leak-free design. This is stainless hardware and a gasket is also included for the install.
With this aftermarket fuel level sensor you’ll get extremely accurate readouts on a fuel gauge to know exactly where your fuel level stands. They come with installation instructions that’ll walk you through the whole process. If you have any questions about our new fuel tank level sensor, give us a shout anytime and we’ll be happy to be of service.