2-1/16" Tinted 30 PSI Fuel Pressure Gauge Kit

GlowShift’s Tinted Series 30 PSI Fuel Pressure Gauge is the optimal choice for any driver looking to keep a close eye on their diesel truck’s fuel system pressure to ensure it’s performing optimally. If you find that levels are running too low, this could be a direct result of a loss of horsepower or damage to the fuel pumps and/or injectors. This diesel fuel pressure gauge reads from 0 to 30 PSI by utilizing the included electronic fuel pressure sending unit that installs directly to the fuel pump or lift pump for accurate readings.

Each electronic Tinted Series Gauge is driven by Stepper Motor Technology that allows for smooth and stable needle movement with instant feedback from the 1/8-27 NPT pressure sending unit. The 2 1/16” (52mm) gauge face features a black dial with white LED backlighting and an illuminated red needle that sweeps 270 degrees. Connect to your factory headlight switch and dim 30% for easier viewing at night. This diesel fuel pressure gauge is housed in a two tone gun metal gauge body with a brushed aluminum trim ring and a low profile, magnified tinted lens for a sleek look and style. Modular connectors on the back of the gauge enable effortless Plug and Play connectivity for the Sensor and Power harnesses, with Mounting Hardware and step-by-step Installation Instructions also included.

Note: This 30 PSI fuel pressure gauge includes a 1/8-27 NPT thread size on the sensor, and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for the installation of the sensor. If you are unsure if your application requires additional threading adapters, please contact a GlowShift Technical Support Specialist.

Dodge Cummins Note: A Snubber Valve is required when installing a GlowShift Tinted Series 30 PSI Fuel Pressure Gauge into a Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup of a Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

GM Duramax Note: If you are installing this gauge to a GM Duramax engine, an aftermarket lift pump is required for the gauge to function properly.

• Tinted Series 30 PSI Fuel Pressure Gauge
• 2-1/16” (52mm) Diesel Fuel Pressure Gauge
• 1/8-27 NPT Electronic Fuel Pressure Sensor
• 9’ Pressure Sensor Harness
• 2’ Power Harness
• Mounting Bracket
• Mounting Hardware
• Gauge Visor
• Installation Instructions
• Free Lifetime Technical Support
• One Year Limited Warranty