10 Color Digital Dual BAR Pressure Gauge

2 Pressure Gauges In 1
GlowShift’s 10 Color Digital Dual BAR Pressure Gauge combines two separate pressure gauges into one easy-to-read gauge with a bright digital LED display for effective monitoring of both functions. Choose any two settings between boost, oil pressure or fuel pressure and take simultaneous readings from 0 to 7.0 BAR. This 2-in-1 gauge is electronically driven and features 2 customizable displays with bold, easy to read, quick glance digital numeric readouts. Drivers have the ability to set each display to any combination of the featured 10 colors.

10 Color Digital Gauge Series
The 10 Color Digital Series features a flat black gauge face with a digital numerical readout for quick glance readings. Each gauge has an ultra-thin design with a depth of 1.32” and an LED display that measures 1.05” x 0.43”. Set the digital display to one of 10 different color options including Blue, Green, Red, Yellow, White, Teal, Purple, Pink, Amber and Orange. You can also activate 10 Color Cycle Mode or 10 Color Fade Mode which utilize all of the featured colors. At startup, Self-Calibration Mode ensures that the gauge is performing optimally. For an easier viewing experience while driving at night, connect the orange wire to the headlight switch source and the gauge will dim 50% when the headlights are on.

Monitoring Options
GlowShift’s Digital Dual Pressure Gauge features three monitoring options that offer multiple benefits as well as peace of mind. As a boost gauge, you can monitor your turbocharged or supercharged vehicle’s boost pressure to make sure you don’t overboost which could potentially cause engine damage. For use as an oil pressure gauge, keep an eye on the changing oil pressure levels of your vehicle to ensure that the bearings, crankshaft and other critical engine parts stay properly lubricated. With the fuel pressure gauge setting you can monitor your vehicle’s fuel pressure for horsepower, fuel pump and fuel injector performance, confirming if changing pressure levels are running too high or too low.

Parts For Installation
Everything required for your pressure gauge install comes as part of this BAR pressure gauge kit. Included are (2) 1/8-27 NPT Electronic Pressure Sensors and (2) 9’ Pressure Sensor Harnesses which give you access to extremely accurate readings. Each gauge kit also comes with a 2’ power harness, gauge visor, mounting hardware and installation instructions that walk you through the process step by step.

Note:
These dual digital gauges include a 1/8-27 NPT thread size on the sensor and your vehicle may not come equipped with the same thread size. An additional threading adapter may be required for installation. If you are unsure if your application will require additional threading adapters, please contact a GlowShift Technical Support Specialist.

GlowShift Guarantee
The ambient GlowShift includes a one year limited warranty and free lifetime technical support with every purchase.