2010-2018 Dodge Ram 6.7L Cummins Big Line Kit
Posted by Matt P. on May 02, 2018
- 6.7L Cummins Big Line Kit
- 2010-2018 Dodge Ram
- Fuel Pressure Gauge Adapter
- Access Injection Pump Inlet
- Accurate Fuel Pressure Readings
- Pressure Flows More Freely
- Prevent Dips or Spikes
- Monitor Your Fuel System
Are you installing a fuel pressure gauge into a 2010-2018 Dodge Ram 6.7L Cummins diesel truck? Get extremely accurate readings with a GlowShift 2010-2018 Dodge Ram 6.7L Cummins 3/8” Fuel Pressure Big Line Kit. This Dodge Ram fuel pressure big line kit is required to gain access to the injection pump inlet on your diesel truck. It replaces the restrictive line from the fuel filter housing to the injection pump, allowing your Dodge Ram’s fuel system to flow smoothly.
Each Dodge Ram Cummins Big Line Kit comes with a (1) 3/8” 4ft Rubber Fuel Hose, (1) Injection Pump Connector with O-Ring, (1) Brass Push-On Hose Connector, (1) T-fitting to install the Fuel Pressure Sensor, (1) Fuel Filter Housing Quick Connector and (4) Hose Clamps to secure the line to the fittings.
Adding the GlowShift 1/8 NPT Fuel Pressure Snubber Valve will work with the big line kit to regulate the fuel pressure and eliminate any fuel pressure spikes that are present throughout the fuel system during the initial ignition and startup. These Dodge Ram Cummins fuel pressure adapters allow you to monitor your truck’s fuel pressure to watch for any spikes in your fuel system which could cause early and unexpected failure of electronic fuel pressure sensors or sending units.
Stay on top of fuel pressure readings for any 2010-2018 Dodge Ram and monitor with pinpoint accuracy by installing a 6.7L Cummins Big Line Kit.